- Load Capacity:
 - Load Capacity
- The load a caster or wheel will hold. (Gross weight should be divided by the number of casters or wheels on which it is distributed.)
| 75 lb. |
- Wheel Diameter:
- Wheel Diameter
- The outside Diameter of the wheel. Note: Larger diameter wheels tend to roll easier and are more shock absorbing than smaller diameter wheels.
| 1.97 in. |
- Wheel Material:
- Wheel Material
- The material that constructs the wheel.
| Nylon |
- Wheel Color:
- Wheel Color
- The color of the wheel.
| Black |
- Overall Height:
- Overall Height
- The vertical distance from the top of the caster mounting plate to the bottom of the wheel.
| 2.625 in. |
- Swivel Radius:
- Swivel Radius
- The horizontal distance from the center of the kingpin to the trailing edge of the wheel. This determines the "sweep" of a caster as it pivots; a good thing to know to make sure the wheel doesn't strike something as it turns.
| 1.75 in. |
- Body Finish:
- Body Finish
- Referring to what type of finish is being used.
| Black |
- Body Material:
- Body Material
- This is describing what type of material is being used to make the rig.
| Nylon |
- Mounting Type:
- Mounting Type
- The bracket type being used to mount.
| Top Plate |
- Top Plate Dimensions:
- Top Plate Dimensions
- Determined by measuring from one outside edge to the other outside edge.
| 1.5 in. x 1.5 in. |
- Bolt Hole Pattern:
- Bolt Hole Pattern
- The distance from the center of one bolt hole to the center of the next. Where slotted bolt holes are used, two dimensions will be shown.
| 1 in. x 1 in. |
- Bolt Hole Size:
- Bolt Hole Size
- This is indicating what size axel is going to be used.
| 0.25 in. |
- Wheel Count:
- Wheel Count
- The number of wheels on the caster.
| 2 |
