TWUN-60N-T16-GS
  • Load Capacity:
    Load Capacity
    The load a caster or wheel will hold. (Gross weight should be divided by the number of casters or wheels on which it is distributed.)
100 lb.
  • Wheel Diameter:
    Wheel Diameter
    The outside Diameter of the wheel. Note: Larger diameter wheels tend to roll easier and are more shock absorbing than smaller diameter wheels.
2.36 in.
  • Wheel Material:
    Wheel Material
    The material that constructs the wheel.
Nylon
  • Wheel Color:
    Wheel Color
    The color of the wheel.
Black / Silver
  • Overall Height:
    Overall Height
    The vertical distance from the top of the caster mounting plate to the bottom of the wheel.
2.75 in.
  • Swivel Radius:
    Swivel Radius
    The horizontal distance from the center of the kingpin to the trailing edge of the wheel. This determines the "sweep" of a caster as it pivots; a good thing to know to make sure the wheel doesn't strike something as it turns.
2.25 in.
  • Body Finish:
    Body Finish
    Referring to what type of finish is being used.
Black
  • Body Material:
    Body Material
    This is describing what type of material is being used to make the rig.
Nylon
  • Mounting Type:
    Mounting Type
    The bracket type being used to mount.
Threaded Stem
  • Thread Size:
    Thread Size

    Selecting the Right Thread Size
    Inch fasteners are specified with a size and the number of threads. For example, 1/4"-28 indicates a 1/4" diameter screw with 28 threads per inch.
    Threaded Stem


    Metric fasteners are specified with a thread pitch instead of a thread count. The thread pitch is the distance between threads.

    Metric Stem

16
Stem Diameter:0.375 in.
Stem Length:0.75 in.
  • Wheel Count:
    Wheel Count
    The number of wheels on the caster.
2
Switch to Metric Units
 
60mm Designer Twin Wheel Un-Hooded Caster with 3/8-16 x 3/4" Threaded Stem
 

 


60mm Designer Twin Wheel Un-Hooded Caster with 3/8-16 x 3/4  Threaded Stem

Similar Products

Accessories

No matching accessories